-
A 36V 100Ah marine lithium battery with 3.84kWh of LiFePO4 power for serious trolling motor runtime.
The Epoch 36V 100Ah Marine Lithium Battery is a high-capacity 36V trolling motor battery, 36V lithium battery for boat upgrades, and deep cycle marine battery 36V solution for anglers who want long runtime without managing three separate 12V lead-acid batteries. Built with 3.84kWh (3,840Wh) of nominal stored energy at 38.4V, an IP67 waterproof enclosure, internal heating for cold-weather charging, Bluetooth monitoring, an included 10-segment battery meter, and an advanced BMS, it powers compatible 36V trolling motors and other 36V deep-cycle systems.
Key Features
-
36V 100Ah Heated Bluetooth LiFePO4 (3.84kWh): A 38.4V nominal, 100Ah deep-cycle battery with 3.84kWh (3,840Wh) of nominal stored energy for 36V trolling motors and other 36V deep-cycle systems. It is not a drop-in replacement for every lead-acid or AGM installation: check tray fitment, terminal clearance, cable size, overcurrent protection and charger profile first.
-
Replaces a Three-Battery 12V Bank: One 38.4V battery can replace a three-battery 12V lead-acid trolling-motor bank with far less weight, in a 75 lb (34.0kg) case measuring 20 × 10.25 × 11 in.
-
High-Performance Output: 120A maximum continuous discharge (50A recommended) and a 200A peak for up to 60 seconds. Size loads, conductors and overcurrent protection to the 120A continuous rating. Deep-cycle only: not for engine cranking, outboard starting or golf carts.
-
100A Charging: 100A maximum continuous charge current (50A recommended, 150A peak for up to 10 seconds) and a 43.8V maximum charge voltage. Use a LiFePO4 charge profile, such as the Epoch 36V 15A LiFePO4 charger; for alternator charging, a DC-to-DC charger is highly recommended.
-
Heated for Cold-Weather Charging: Rated to charge from -20°C to 55°C (-4°F to 131°F) with internal heating. In cold weather the internal heater warms the cells before charging begins, and the BMS's low-temperature charge protection lets the cells charge only from 0°C to 55°C (32°F to 131°F).
-
Smart Bluetooth Monitoring: The free Epoch Li-Ion app (iOS and Android) shows state of charge, voltage, current, temperature, cycle data and battery status. The included 10-segment battery meter shows the remaining charge in 10% steps and sounds an alarm at 10%, and a power button on the lid switches the battery on and off.
-
Advanced BMS Protection: Protects against overcharge, over-discharge, over-current, short circuit, and high and low temperature. It does not replace an external fuse or DC-rated breaker for the wiring.
-
IP67 Waterproof Enclosure: Dust-tight and protected against temporary immersion to 1m for 30 minutes, for trolling-motor compartments, fishing boats and other wet marine locations. Not rated for water jets, pressure washing or long-term submersion.
-
Parallel Expansion: Up to 4 matched B36100A-A batteries in parallel (400Ah, 15.36kWh) for longer runtime. Do not connect in series.
-
3,500+ Cycle Life & Low Maintenance: No watering or acid service; routine inspections keep it operating safely.
-
11-Year Limited Manufacturer Warranty: Register within 90 days of purchase for full warranty coverage.
Key Benefits
-
Waterproof (IP67): Dust-tight and protected against temporary immersion to 1 m for 30 minutes.
-
Cycle life (3,500+): Over 9 years at one full cycle a day. Rated at the depth of discharge, charge rate and temperature stated on the datasheet, to its end-of-life capacity.
-
Bluetooth app (iOS + Android): Charge, voltage and temperature on your phone in the Epoch Li-Ion app.
-
Protection (Advanced BMS): Guards against overcharge, over-discharge, overcurrent and short circuit.
-
Cold weather (Self-heating): Warms its cells before charging, so it can charge in freezing weather.
-
Thermal stability (LiFePO4): Lithium iron phosphate has a far lower thermal-runaway risk than other lithium chemistries. The BMS adds over-temperature and low-temperature charge protection.
-
Designed & engineered in the USA: Veteran owned
Built to go further
-
11-year limited warranty: Register within 90 days
-
U.S.-based support: Help when you need it
-
Veteran owned: Mission-focused brand
-
Designed and engineered: U.S. product design
-
Advanced BMS: Built-in protection
-
LiFePO4 safety: Stable lithium chemistry
Drop the Weight: Replace Three Heavy 12V Batteries
One 38.4V LiFePO4 battery can replace a three-battery 12V lead-acid trolling motor bank, with far less weight.
Swapping a daisy-chain of three 12V lead-acid batteries for one 36V 100Ah marine lithium battery simplifies your boat’s electrical layout, opens up valuable compartment space, and removes substantial weight from the hull. That means less clutter, fewer interconnect cables, and a cleaner installation for modern fishing boats.
This battery measures 20 in L × 10.25 in W × 11 in H (508 × 260.4 × 279.4 mm) and weighs about 75 lb (34.0 kg). It is not a drop-in replacement for every lead-acid or AGM installation: before installation, confirm your tray space, hold-down system, cable size and routing, terminal clearance, overcurrent protection, charger profile, and trolling motor manufacturer requirements.
Power Your 36V Trolling Motor
3.84kWh lithium storage for compatible 36V trolling motor systems.
With 100Ah of capacity, 3.84kWh of nominal stored energy, and 120A continuous discharge (200A for up to 60 seconds), this 36V deep cycle lithium battery is built for anglers who spend long days on the water. LiFePO4 voltage stays nearly flat across most of the discharge, so your trolling motor sees steady voltage through most of the battery’s usable capacity. For planning, Epoch uses 80% of nominal energy, about 3,072Wh (80Ah): roughly 8 hours at a 10A load or 6.1 hours at 500W.
Use it with compatible 36V trolling motors from the major brands when voltage, current draw, fuse protection, charger profile, and manufacturer battery requirements match. For extended runtime, matched batteries may be wired in parallel up to Epoch’s stated limit of four batteries.
Built-in heating for all-season fishing
A heated marine lithium battery for cold-weather charging support.
In cold weather, the internal heater warms the cells before charging begins, and the BMS’s low-temperature charge protection allows charging only within the cells’ 0°C to 55°C (32°F to 131°F) range, so the battery is rated to charge from -20°C to 55°C (-4°F to 131°F) with heating. While the cells warm, the app may show little or no charge current; leave the charger connected and switched on.
IP67 waterproof and rugged marine construction
Dust-tight and rated for temporary immersion.
The IP67 waterproof enclosure is dust-tight and protected against temporary immersion up to 1 meter for 30 minutes, which suits trolling motor compartments, fishing boats, and other wet marine locations. It is not rated for water jets, pressure washing, or long-term submersion: mount it securely and not where water can pool around the battery.
Smart Bluetooth app monitoring
A Bluetooth trolling motor battery monitor in your pocket.
Built-in Bluetooth connects to the free Epoch Li-Ion app for iOS and Android, so you can check state of charge, voltage, current, temperature, cycle data, and battery status from your smartphone. The app’s state of charge is a calculated estimate; the included 10-segment battery meter shows the remaining charge in 10% steps and sounds an alarm at 10%.
Deep-cycle battery notice
This model is designed as a 36V heated Bluetooth deep-cycle LiFePO4 battery for trolling motors and compatible 36V power systems. It is not designed for engine cranking, outboard starting, or golf carts. Size loads, conductors, and overcurrent protection to the 120A continuous rating; the 200A rating applies for up to 60 seconds only. Install a fuse or DC breaker close to the positive terminal. Do not wire this battery in series; this model supports a maximum of one battery in series and up to four batteries in parallel.
Battery features
Marine lithium performance with heating, Bluetooth visibility, and IP67 protection.
-
36V trolling motor battery: Single-battery 36V platform for compatible marine trolling motor systems.
-
36V 100Ah marine lithium battery: Stores 3.84kWh (3,840Wh) of nominal energy at 38.4V for extended runtime on the water.
-
Native 36V: One 38.4V battery can replace a three-battery 12V lead-acid trolling motor bank, with far less weight.
-
120A continuous discharge: 50A (0.5C) recommended. Size loads, conductors, and overcurrent protection to the 120A continuous rating.
-
200A peak discharge: Delivers short-duration output for up to 60 seconds when system demands increase.
-
100A continuous charge: Accepts up to 100A from compatible 36V LiFePO4 charging equipment; 50A (0.5C) recommended.
-
150A peak charge: Up to 150A charge current for up to 10 seconds.
-
Internal heating: Warms the cells before charging in freezing weather; rated to charge from -20°C (-4°F) with heating.
-
Bluetooth battery monitor: Connect to the Epoch Li-Ion app to review state of charge, voltage, current, temperature, cycle data, and battery status.
-
IP67 waterproof rating: Dust-tight and rated for temporary immersion up to 1 meter for 30 minutes. Not for water jets or pressure washing.
-
Advanced BMS: Helps protect against overcharge, over-discharge, over-current, short circuit, and temperature extremes.
-
3,500+ cycle life: Long-lasting LiFePO4 performance for demanding marine and deep-cycle applications.
-
10-segment battery meter: Included. Shows the remaining charge in 10% steps and sounds an alarm when the charge reaches 10%.
Compatible chargers and accessories
Use dedicated 36V LiFePO4 charging equipment.
- Epoch 36V 15A LiFePO4 battery charger (CHG-36V15A), the recommended charger: roughly 6.7–7 hours from fully discharged, plus taper and balancing time.
- Programmable 36V LiFePO4-compatible marine chargers.
- A DC-to-DC charger programmed for LiFePO4 for alternator charging (highly recommended).
- Properly sized marine cabling, fusing, hold-downs, and terminal hardware.
IP67 waterproof marine protection
Built for spray, rain, wet decks, and harsh boat environments.
The IP67-rated enclosure is dust-tight and protected against temporary immersion up to 1 meter for 30 minutes, which suits trolling motor compartments, fishing boats, and other wet marine locations. It is not rated for water jets, pressure washing, or long-term submersion. For best results, keep terminals clean and protected, secure the battery properly, and do not mount it where water can pool around the case.
Why upgrade to Epoch LiFePO4?
More usable energy. Less maintenance. More confidence on the water.
LiFePO4 technology provides stable voltage output, fast charging capability, long service life, and maintenance-free operation. Compared with traditional lead-acid trolling motor banks, this lightweight 36V battery simplifies installation while delivering efficient usable energy, smart monitoring, and rugged marine protection.
Fitment and charging note
Verify your boat, charger, and trolling motor before installation.
Always confirm compartment dimensions, cable clearance, M8 terminal compatibility, charger compatibility, fuse sizing, trolling motor current requirements, and manufacturer guidance before installation. Install the main fuse or DC-rated breaker as close as practical to the battery positive terminal, and secure the battery upright with a tray, strap, or bracket rated for its 75 lb weight. Use a lithium-compatible 36V charger or programmable charging system set to Epoch’s recommended parameters. For parallel banks of up to four, use matched B36100A-A batteries of similar age, condition, and firmware, each fully charged and at the same state of charge before connecting.
Applications and use cases
- 36V trolling motors
- Bass and fishing boats
- Pontoons and skiffs
- Aluminum boats and bay boats
- Replacing a three-battery 12V trolling motor bank
- Marine house power (36V systems)
- Marine electronics (with suitable conversion for 12V devices)
- Off-grid solar systems
- Solar battery banks and inverter systems
- Cabins and remote power systems
- Backup power and standby systems
At a glance
- 36V system voltage
- 100Ah capacity
- 3.84kWh stored energy
- 120A continuous output
- IP67 waterproof
- 75 lb approx. weight
Suitable For:
- 36V trolling motor systems where voltage and current requirements match.
- Compatible 36V marine trolling motor platforms from the major brands.
- Bass boats, fishing boats, pontoons, skiffs, aluminum boats, bay boats, and compatible marine setups.
- Replacement for three 12V lead-acid trolling motor batteries in compatible 36V banks.
- Marine house power and electronics in compatible 36V systems, with suitable conversion for 12V devices.
- Cold-weather fishing setups where a heated marine lithium battery provides charging support.
- Parallel battery banks up to four matched batteries for expanded amp-hour capacity.
- Solar, off-grid, cabin, and backup systems built around compatible 36V charging and inverter equipment.
- Boat installations where the 20 in × 10.25 in × 11 in case and M8 terminals fit properly.
Certifications & Standards
-
IP67: Dust-tight, and protected against temporary immersion in up to 1 m of water for 30 minutes. Under IEC 60529 the first digit rates solids and the second rates water.
-
UL 1642: The UL standard for lithium cells. Each cell design is tested for fire and explosion risk under abuse before it is built into a pack.
-
IEC 62619: The international safety standard for rechargeable lithium cells and batteries in industrial use, including stationary energy storage.
-
CE: The manufacturer's declaration that the product meets the European Union's health, safety and environmental requirements, which is required to sell it in the European Economic Area.
-
RoHS: Complies with the EU Restriction of Hazardous Substances directive, which limits lead, mercury, cadmium and other toxic materials in electronics.
-
UN 38.3: The United Nations test series every lithium battery must pass before it can be shipped by air, sea or road.
Please Note: Deep-cycle only: not for engine cranking, outboard starting or golf carts.
Please Note: Do not connect in series; parallel only, up to 4 matched batteries.
Please Note: Size loads, conductors and overcurrent protection to the 120A continuous rating; the 200A rating applies for up to 60 seconds only.
Please Note: Not a drop-in for every lead-acid or AGM installation: confirm tray space, hold-downs, terminal clearance, cable size and charger profile.
Please Note: Not rated for water jets, pressure washing or long-term submersion; do not mount where water can pool.
Please Note: The BMS does not replace a fuse or DC-rated breaker close to the battery positive.
Please Note: During cold-weather warm-up the app may show little or no charge current; leave the charger connected.
Please Note: Confirm the ratings on your battery label before raising a charger's current limit; earlier production may carry different ratings.
-
Specifications
General
Brand: Epoch Batteries
Model / SKU: B36100A-A
Battery type: Heated Bluetooth deep-cycle LiFePO4 battery
Primary application: 36V marine trolling motor and compatible 36V deep-cycle systems
Chemistry: LiFePO4 / Lithium iron phosphate
Cell type: Prismatic LiFePO4
Cell configuration: 12S
Bluetooth: Yes — Epoch Li-Ion app (iOS and Android)
Internal heating: Yes — for cold-weather charging
On/off control: Power button on the lid; blue LED when on
Battery meter: 10-segment meter, included
Cycle life: 3,500+ cycles
Voltage and capacity
Voltage class: 36V
Nominal voltage: 38.4V
Nominal capacity: 100Ah
Energy stored: 3.84kWh (3,840Wh) nominal
Maximum charge voltage: 43.8V
Operating voltage range: 30.0V – 43.8V
Current ratings
Max continuous discharge: 120A (1.2C)
Recommended discharge current: 50A (0.5C)
Max discharge peak current: 200A for up to 60 seconds
Max continuous charge current: 100A (1C)
Peak charge current: 150A for up to 10 seconds
Recommended charge current: 50A (0.5C)
Series connections: Max 1 — do not connect in series
Parallel connections: Max 4 batteries in parallel, plug and play
Maximum parallel capacity: Up to 400Ah (15.36kWh) with four matched batteries
Temperature
Charge temperature range: -20°C to 55°C / -4°F to 131°F, with heating
Cell charge temperature range: 0°C to 55°C / 32°F to 131°F
Discharge temperature range: -20°C to 60°C / -4°F to 140°F
Recommended storage temperature: 0°C to 35°C / 32°F to 95°F; max 12 months
Reconnect temperature: 50°C / 122°F
Low-temperature charge protection: Yes
Dimensions and weight
Length: 20 in / 508 mm
Width: 10.25 in / 260.4 mm
Height: 11 in / 279.4 mm
Overall dimensions: 20 in L × 10.25 in W × 11 in H
Weight: 75 lb / 34.0 kg
Mechanical
Case material: ABS and PC blend, UL94-V0 flame rating
Enclosure protection: IP67 per IEC 60529 — dust-tight; temporary immersion to 1 m for 30 minutes; not for water jets or pressure washing
Terminal type: M8 female
Mounting: Upright, secured with a tray, strap, bracket, or enclosure rated for 75 lb
Recommended charging settings
Maximum continuous charge current: 100A, all charging sources combined
Recommended charge current: 50A (0.5C)
Peak charge current: 150A for up to 10 seconds
Bulk / absorption voltage: 42.6V – 43.2V
Absorption end condition: Charge current ≤ C/20 (5A) or 15 minutes, whichever comes first
Float voltage: Disabled preferred, or 40.0V – 40.8V
Re-bulk voltage: 39.6V
Temperature compensation: 0mV/°C (off)
Equalization: Disabled
BMS high-voltage cutoff: 43.8V
SoC recalibration voltage: 43.8V
Alternator charging: DC-to-DC charger programmed for LiFePO4, highly recommended
BMS protection and compliance
Built-in BMS: Yes — overcharge, over-discharge, over-current, short-circuit, and high- and low-temperature protection
External protection: Required: the BMS does not replace a fuse or DC-rated breaker close to the battery positive terminal
Cell-level certifications: UL 1642, IEC 62619:2022 (the cells used in this battery, not the complete battery)
Compliance: CE, RoHS
Shipping classification: UN 38.3, Class 9
Warranty: 11-year limited manufacturer warranty; register within 90 days of purchase
Quick specifications
Cell Configuration: 12S
Chemistry: LiFePO4
Voltage: 38.4V
Max Charge Voltage: 43.8V
Operating Voltage Range: 30.0 - 43.8V
Ah Capacity: 100Ah
Max Continuous Discharge Amps: 120A (50A recommended)
Max Charge Current Amps: 100A (50A recommended); 150A peak for up to 10 Seconds
Max Discharge Peak Current Amps: 200A (up to 60 Seconds)
Series | Parallel: Parallel only: Max (4) in Parallel (400Ah); do not connect in series
Charge Temp Range: -20°C (-4°F) / 55°C (131°F) (with heating)
Discharge Temp Range: -20°C (-4°F) / 60°C (140°F)
Storage Temp: 0°C (32°F) / 35°C (95°F) (recommended; max 12 Months)
Safety: BMS (Battery Management System) Over Voltage, Under Voltage, Over-Current, Short Circuit, Over Temperature, Under Temperature
Length: 20.0 in
Width: 10.25 in
Height: 11.0 in
Weight: 75 lbs
Additional information
Cell-level certifications: UL 1642, IEC 62619:2022
Compliance marks: CE, RoHS
Transport: UN 38.3, Class 9
Certification: UL 1642 and IEC 62619 apply to the cells used in this battery, not to the complete battery assembly.
In the Box
- 36V 100Ah LiFePO4 battery (B36100A-A)
- 10-segment battery meter
-
Recommended Charging Settings
- Maximum Continuous Charge Current: 100A per battery, all charging sources combined
- Recommended Charge Current: 50A (0.5C)
- Peak Charge Current: 150A for up to 10 seconds
- Bulk/Absorption: 42.6V-43.2V
- Absorption End Condition: Charge current ≤ C/20 (5A) or 15 min, whichever comes first
- Float Voltage: Disabled (preferred) or 40.0V-40.8V
- Re-bulk: 39.6V
- Temperature Compensation: 0 mV/°C (off)
- Equalization: Disabled; do not use lead-acid equalization, desulfation or repair modes
- Charge Temperature Range: -20°C to 55°C (-4°F to 131°F) with internal heating; the heater warms the cells before charging begins, and the cells themselves charge only from 0°C to 55°C (32°F to 131°F). Little or no charge current during warm-up can be normal: leave the charger connected and switched on
- BMS High Voltage Cutoff: 43.8V
- SoC Recalibration: 43.8V
- Alternators: use a DC-to-DC charger programmed for LiFePO4 (highly recommended)
- Solar Charge Controllers: program the settings above and confirm the array's open-circuit voltage suits the controller and bank voltage
- NOTE: Select a LiFePO4 profile or program the settings above; do not use lead-acid, AGM or gel profiles. Confirm the ratings on your battery label before raising a charger's current limit; earlier production may carry different ratings.
-
What's the deal with Epoch Batteries? Here's my take.
Epoch 12V 100Ah Waterproof LiFePO4 Marine Battery, Best in Class?
Epoch 36V Lithium Battery Made The Switch!
-
B36100A-A Spec Sheet
B36100A-A User Manual
B36100A-A Technical Data Sheet
Safety Data Sheet (LiFePO4)
-
How long will this 36V 100Ah battery run a trolling motor?
It depends on how much power your motor draws. For planning, Epoch uses 80% of nominal energy: about 3,072Wh (80Ah) per battery. That works out to roughly 8 hours at a 10A load, 12.3 hours at 250W, or 6.1 hours at 500W (runtime ≈ usable Wh ÷ load W, or usable Ah ÷ load A). Real runtime varies with thrust setting, boat weight, wind, current, temperature, battery age, and duty cycle. For longer runtime, up to four matched batteries can run in parallel.
Can I use my existing 12V marine charger to charge this battery?
No. This is a 36V lithium battery, so it must be charged with a 36V LiFePO4 charger or a programmable charger set to Epoch’s LiFePO4 settings. A 12V charger, or a lead-acid, AGM, or gel charger, cannot charge this battery correctly. Epoch’s 36V 15A LiFePO4 charger (CHG-36V15A) is the recommended charger; it charges a fully discharged battery in roughly 6.7–7 hours, plus taper and balancing time.
Will this 36V battery fit in my boat's current battery compartment?
One battery replaces a three-battery 12V lead-acid bank, but you should measure your compartment before ordering. The case measures 20 in L × 10.25 in W × 11 in H (508 × 260.4 × 279.4 mm) and weighs about 75 lb (34.0 kg). It is not a drop-in replacement for every lead-acid or AGM installation: confirm tray space, hold-down straps, terminal clearance, cable size and routing, overcurrent protection, and charger compatibility before installation.
Can I wire two of these 36V 100Ah batteries together for even more power?
Yes, in parallel. Up to four matched B36100A-A batteries can be wired in parallel: two make a 36V 200Ah (7.68kWh) bank and four a 400Ah (15.36kWh) bank. Use batteries of similar age, condition, and firmware, charge each one fully before connecting, keep the cables equal in length and gauge, and fuse each battery branch. Do not wire this model in series.
Does this replace three 12V trolling motor batteries?
Yes, in compatible 36V systems one 38.4V battery can replace a traditional bank of three 12V lead-acid trolling motor batteries. It simplifies wiring, frees up compartment space, and significantly reduces boat weight. It is not a drop-in replacement for every installation, so always confirm your trolling motor voltage, charger profile, cable size, fuse protection, and manufacturer requirements before replacing an existing bank.
Will it work with my 36V trolling motor?
This battery is designed for compatible 36V trolling motor systems, including many setups using the major marine trolling motor brands. Confirm that your motor is a 36V model and that its current draw, wiring, fuse protection, and manufacturer battery requirements match before installation.
Is this an IP67 waterproof 36V battery?
Yes. This model has an IP67 waterproof enclosure: dust-tight and protected against temporary immersion up to 1 meter for 30 minutes. It is not rated for water jets, pressure washing, or long-term submersion, so install it in a secure battery compartment where water cannot pool around the case.
Does the Bluetooth trolling motor battery monitor show state of charge?
Yes. Built-in Bluetooth connects to the free Epoch Li-Ion app so you can view state of charge, voltage, current, temperature, cycle data, and battery status on an iOS or Android device. The app’s state of charge is a calculated estimate, so check voltage, current, and any alarms along with it. The included 10-segment battery meter also shows the remaining charge in 10% steps.
How does the internal heating work?
In cold weather, the internal heater warms the cells before charging begins. The BMS checks cell temperature and allows charging only within the cells’ 0°C to 55°C (32°F to 131°F) range, so the battery is rated to charge from -20°C to 55°C (-4°F to 131°F) with heating. While the cells warm, the app may show little or no charge current. This can be normal: leave the charger connected and switched on, and allow more time in colder conditions.
Can this battery be used for engine starting?
No. This is a 36V deep cycle marine battery for trolling motor and compatible 36V power applications. It is not designed for engine cranking, outboard starting, or golf carts. Use a dedicated cranking-rated battery for engine starting applications.
-
Epoch Batteries Limited Warranty
Warranty Period
11-year limited manufacturer warranty; register within 90 days of purchase for full coverage
Epoch Batteries-branded products are covered against qualifying defects in materials and workmanship for the applicable warranty period, subject to Epoch's model-specific remedy schedule and the terms of its warranty policy. Epoch-branded chargers carry a 2-year limited warranty and accessories (such as fuel gauges and voltage reducers) a 1-year limited warranty, from the original purchase date.
Registration
Register your battery with Epoch within 90 days of purchase for full warranty coverage. If it is not registered within that time, the warranty period begins from the battery's original manufacturing date. Proof of ownership is required for any claim, and coverage is non-transferable and applies only to the original purchaser.
Remedy
After inspection and testing, Epoch will provide the applicable remedy for a qualifying manufacturing defect: an approved repair, a replacement, or a comparable-product offer according to the model's schedule. Typical repair turnaround is 3–10 business days once the product is received.
Exclusions
Coverage may be denied when a failure is caused by misuse, improper handling, installation or storage, or use outside the product's specifications. Examples include an unsecured battery; loose, corroded or improperly connected terminals; series or parallel connections beyond the manufacturer's recommendations; reverse polarity or short circuits; impact, fire or water submersion; storage above 140°F or below -40°F; prolonged storage fully discharged or batteries left uncharged for more than three months; poor crimps, undersized cables or damaged wiring; opened, modified or tampered products; and use in applications the battery was not designed for, including repeated engine starting on non-cranking models.
Obtaining Warranty Service
Start a claim through the Epoch Batteries Warranty Portal with your model and serial number, proof of purchase, a description of the issue and supporting photos or videos. If approved, Epoch provides an RMA number and packing instructions. Do not ship a product without a valid RMA. The customer arranges and pays for shipment to Epoch, packaged in compliance with lithium battery shipping rules. Epoch Batteries can be reached at 1-888-501-1846 or support@epochbatteries.com.
Visit Epoch's Warranty Page to review the full warranty terms.
-
Shipping is typically through freight carriers and the actual shipping time is contingent on your location and the specific warehouse dispatching your order. Please allow for a 1-3 business day processing period before shipment, and an estimated delivery time of up to 7 business days. Your confirmation email will include delivery details and we will send you a tracking number as soon as one is available. If you ordered several separate items, you may receive multiple tracking numbers. Once the item has been shipped, the freight service will contact you to coordinate the date and time of delivery. If you require any special accommodations during delivery please let us know as soon as possible and let the delivery company know when arranging the appointment.
Typically, orders will be dropped off either curbside or outside your front door or garage. It is your responsibility to bring the order inside or to its final destination and to remove any existing items.
Depending on the item, parts may be shipped in multiple boxes, and assembly may be required. When your order is delivered, please check that you have all pieces of the item and that nothing is damaged. If your order is damaged during transit and external damage is visible, note the damage immediately, write it on the delivery documents, take photos and/or videos, and refuse shipment. If there is no visible external damage, accept the package but note “subject to concealed damage” on the delivery documents. Any damage upon delivery needs to be reported within 24 hours of delivery or you may not be eligible for a refund. For additional information on submitting claims, as well as incorrect item exchanges, and replacements, please see our Refund Policy.
For more information about shipping, please visit our complete Shipping Policy.
-
Why Shop With Eco Emperor?
At Eco Emperor, our mission is to empower you to lead a sustainable and fun lifestyle with ease and confidence. Whether you're upgrading your outdoor experience or enhancing your eco-conscious journey, here’s why choosing us is a decision you can feel great about:
Expert and Customized Care
Our knowledgeable and friendly team is here to support you every step of the way. We pride ourselves on providing personalized service and swift responses to ensure a smooth and satisfying experience. Our dedicated team is available via phone, email, and live chat to provide you with prompt and helpful support.
Authorized Retailer of High-Quality, Trusted Products from Leading Brands
We partner with the best brands in the industry to bring you reliable, high-quality products. As authorized retailers, we guarantee authenticity and offer full manufacturer warranties on every item. You can trust that our products are built to last and perform efficiently.
Free & Fast Shipping
We know you’re eager to begin your new products or start your next outdoor adventure. That’s why we prioritize quick, reliable, and free shipping to get your orders to you on time and in perfect condition.
Competitive Pricing
We believe that sustainable living should be accessible to everyone. We offer competitive pricing on all our products, so you can enjoy high-quality eco-friendly solutions and outdoor products without breaking the bank.
Choose Eco Emperor for all your outdoor and eco-friendly product needs, and become part of a movement that’s embracing a more sustainable and adventurous lifestyle.
Thank you for supporting a greener, cleaner future, while enhancing your outdoor experiences and powering your adventures.💚
![Sok Battery 12V 206Ah Lithium Iron Phosphate (LiFePO4) Solar Battery SK12V206P [Marine Grade]](https://cdn.shopify.com/s/files/1/0806/0803/5119/files/Sok-Battery-12V-206Ah-Lithium-Iron-Phosphate-_LiFePO4_-Solar-Battery-SK12V206P-_Marine-Grade_250x250.jpg?v=1696275766)
![Sol-Ark 15K 120/240/208V 48V [All-In-One] Pre-Wired Hybrid Solar Inverter (UL: Sol-Ark-Limitless 15K-LV)](https://cdn.shopify.com/s/files/1/0806/0803/5119/files/Sol-Ark-15K-120_240_208V-48V-Hybrid-Solar-Inverter-UL-Sol-Ark-Limitless-15K-LV_250x250.jpg?v=1708309305)
