-
The Epoch 24V 230Ah V2 Elite Series (C24230A) puts 5.89kWh of 24V LiFePO4 storage in one managed case with one BMS, so large house banks need fewer interconnects and cleaner routing. It is built for marine house power, RVs and motorhomes, off-grid solar and 24V trolling motor systems.
Native Victron CAN bus communication, internal self-heating, an IP67 enclosure and Bluetooth monitoring through the included battery gauge make it a full system battery. Certified cells, a UL-listed internal fuse, 3,500+ cycles and an 11-year limited manufacturer warranty back it up.
Key Features
-
Native Victron communication: CAN bus at 500 kbit/s to compatible Victron GX devices; with DVCC on, the battery sets the charge voltage and current limits of Victron chargers.
-
110A continuous: 110A continuous charge and discharge (about 2,816W DC at 25.6V), with 300A peak discharge and up to 200A charge for short durations.
-
Self-heating: The heater, powered by the charge source, warms the cells before charging, supporting charging from -30°C (-22°F) ambient.
-
Bluetooth monitoring: The included battery gauge connects to the Epoch Li-Ion app for state of charge, cell voltages, temperatures, history, warnings and over-the-air firmware updates.
-
IP67 enclosure: Dust-tight and protected against temporary immersion in up to 1 m of water for 30 minutes.
-
Scalable banks: Up to 16 batteries in parallel (3,680Ah, 94.21kWh) or up to 2 in series for a 51.2V nominal string.
-
Certified protection: Smart BMS plus a 270A internal fuse (UL 60691), with UL 1642, UL 9540A and IEC 62619:2022 cells.
-
3,500+ cycle life: Rated to 70% remaining capacity, with no watering or equalizing.
Recommended Charging Settings
- Charger type: lithium (LiFePO4) compatible, CC/CV; program every charge source, including Victron equipment
- Bulk/absorption: 28.4V
- Absorption time: 15 minutes per battery in the bank
- Float: 27.0V
- Re-bulk: 26.6V
- Equalization: disabled
- Temperature compensation: disabled (0 mV/°C)
- Charge current: 110A per battery maximum continuous; 200A for short periods
- BMS high-voltage cutoff: 29.2V; never charge above 29.2V
- Alternators: use a DC-DC charger or a lithium-configured alternator regulator
Victron GX Setup
- Set the DIP switches on every battery per the user manual
- Connect the harness's grey RJ45 plug to the GX BMS-CAN port (Cerbo GX or Ekrano GX), or VE.Can 1/2 on a Cerbo GX Mk2 at 500 kbit/s
- Daisy-chain banks with RJ45 cables from each battery's black port to the next battery's blue port, up to 16 in parallel
- On the GX device, turn on DVCC and set the controlling BMS and battery monitor to Epoch
Compatible Accessories
- Epoch V2 & V2-T Mounting Hardware (8D battery bracket, sold separately)
Suitable For:
- RV and motorhome house power (24V)
- Camper vans, travel trailers and overland vehicles
- Marine house power, yachts and cruising boats
- 24V trolling motors and marine electronics
- Off-grid solar and inverter systems
- Home energy storage and backup power
- Cabins and remote power
- Victron-based systems with a compatible GX device
Please Note: Deep-cycle battery for house power and energy storage, not engine starting.
Please Note: Replacing a Group 8D battery: confirm tray fit, hold-down and lid clearance against 20.86 x 8.65 x 12.06 in first.
Please Note: Install upright, secured against vibration, where it stays dry in normal use; not rated for water jets, pressure washing or continuous submersion.
Please Note: Series-parallel arrays are not covered by the published DIP switch settings; contact Epoch before designing one.
Please Note: The internal fuse does not replace system protection: install a DC-rated fuse or breaker close to the battery positive.
Please Note: If an inverter's continuous DC input can exceed 110A, add batteries in parallel.
Please Note: Program all chargers to the LiFePO4 settings so charging stays correct if CAN communication is lost.
Also available as: 24V 230Ah V2-T Elite Series | 24V 230Ah Essential Series
-
Specifications
Dimensions (L x W x H): 20.86 x 8.65 x 12.06 in
Weight: 97 lb
Cell Configuration: 8S1P
Chemistry: LiFePO4
Voltage: 25.6V
Max Charge Voltage: 29.2V
Operating Voltage Range: 20.0 - 29.2V
Ah Capacity: 230Ah
Max Continuous Discharge Amps: 110A
Max Charge Current Amps: 110A (200A for short durations)
Max Discharge Peak Current Amps: 300A (short duration)
Series | Parallel: Max (2) in Series OR Max (16) in Parallel - 2S1P or 1S16P
Charge Temp Range: -30°C (-22°F) / 55°C (131°F) ambient, with self-heating
Discharge Temp Range: -20°C (-4°F) / 55°C (131°F)
Storage Temp: 0°C (32°F) / 35°C (95°F) for up to 1 year; -20°C (-4°F) / 45°C (113°F) for up to 1 month
BMS Protection: Over Voltage, Under Voltage, Over-Current, Short Circuit, Over Temperature, Under Temperature
Model / SKU: C24230A
Stored Energy: 5,888Wh / 5.89kWh
Cell Type: Prismatic LiFePO4
Minimum Voltage: 20.0V (2.5V per cell)
Self-Discharge: ≤3% per month
Nominal Continuous Output Power: Approx. 2,816W DC at 25.6V nominal voltage, before inverter losses
Cell Charge Temperature Range: 0°C to 55°C / 32°F to 131°F
Case Material: ABS and PC blend
Case Flame Rating: UL94 V-0
Enclosure Protection: IP67: dust-tight; temporary immersion to 1 m for 30 minutes. Not rated for water jets, pressure washing or continuous submersion
Terminal Size: M8 threaded
Terminal Torque: 8–12 N·m (71–106 lbf·in)
Internal Fuse: 270A rated (UL 60691); 1,200A transient overload for 3 seconds
Self-Consumption: 20mA powered on; 200µA powered off
Bluetooth: Yes — through the included battery gauge; Epoch Li-Ion app (iOS and Android)
Victron Communications: CAN bus at 500 kbit/s to compatible Victron GX devices (BMS-CAN or VE.Can port)
Cycle Life: 3,500+ cycles to 70% remaining capacity
Certifications: UL 1642, UL 9540A and IEC 62619:2022 cells; UL 60691 internal fuse (TEX150-R1N-XBZ); CE, RoHS
Shipping Classification: UN 3480, Class 9
In the Box
- 24V 230Ah V2 Elite Series battery (C24230A)
- Communication harness
- Mountable battery gauge (Bluetooth)
- Mountable ON/OFF switch
-
C24230A Spec Sheet
C24230A User Manual
C24230A Technical Data Sheet
Internal Fuse UL Listing (TEX150-R1N-XBZ)
-
Epoch Batteries Limited Warranty
Warranty Period
11-year limited manufacturer warranty; register within 90 days of purchase
Epoch Batteries-branded products are covered against qualifying defects in materials and workmanship for the applicable warranty period, subject to Epoch's model-specific remedy schedule and the terms of its warranty policy. Epoch-branded chargers carry a 2-year limited warranty and accessories (such as fuel gauges and voltage reducers) a 1-year limited warranty, from the original purchase date.
Registration
Register your battery with Epoch within 90 days of purchase for full warranty coverage. If it is not registered within that time, the warranty period begins from the battery's original manufacturing date. Proof of ownership is required for any claim, and coverage is non-transferable and applies only to the original purchaser.
Remedy
After inspection and testing, Epoch will provide the applicable remedy for a qualifying manufacturing defect: an approved repair, a replacement, or a comparable-product offer according to the model's schedule. Typical repair turnaround is 3–10 business days once the product is received.
Exclusions
Coverage may be denied when a failure is caused by misuse, improper handling, installation or storage, or use outside the product's specifications. Examples include an unsecured battery; loose, corroded or improperly connected terminals; series or parallel connections beyond the manufacturer's recommendations; reverse polarity or short circuits; impact, fire or water submersion; storage above 140°F or below -40°F; prolonged storage fully discharged or batteries left uncharged for more than three months; poor crimps, undersized cables or damaged wiring; opened, modified or tampered products; and use in applications the battery was not designed for, including repeated engine starting on non-cranking models.
Obtaining Warranty Service
Start a claim through the Epoch Batteries Warranty Portal with your model and serial number, proof of purchase, a description of the issue and supporting photos or videos. If approved, Epoch provides an RMA number and packing instructions. Do not ship a product without a valid RMA. The customer arranges and pays for shipment to Epoch, packaged in compliance with lithium battery shipping rules. Epoch Batteries can be reached at 1-888-501-1846 or support@epochbatteries.com.
Visit Epoch's Warranty Page to review the full warranty terms.
-
Shipping is typically through freight carriers and the actual shipping time is contingent on your location and the specific warehouse dispatching your order. Please allow for a 1-3 business day processing period before shipment, and an estimated delivery time of up to 7 business days. Your confirmation email will include delivery details and we will send you a tracking number as soon as one is available. If you ordered several separate items, you may receive multiple tracking numbers. Once the item has been shipped, the freight service will contact you to coordinate the date and time of delivery. If you require any special accommodations during delivery please let us know as soon as possible and let the delivery company know when arranging the appointment.
Typically, orders will be dropped off either curbside or outside your front door or garage. It is your responsibility to bring the order inside or to its final destination and to remove any existing items.
Depending on the item, parts may be shipped in multiple boxes, and assembly may be required. When your order is delivered, please check that you have all pieces of the item and that nothing is damaged. If your order is damaged during transit and external damage is visible, note the damage immediately, write it on the delivery documents, take photos and/or videos, and refuse shipment. If there is no visible external damage, accept the package but note “subject to concealed damage” on the delivery documents. Any damage upon delivery needs to be reported within 24 hours of delivery or you may not be eligible for a refund. For additional information on submitting claims, as well as incorrect item exchanges, and replacements, please see our Refund Policy.
For more information about shipping, please visit our complete Shipping Policy.
-
Why Shop With Eco Emperor?
At Eco Emperor, our mission is to empower you to lead a sustainable and fun lifestyle with ease and confidence. Whether you're upgrading your outdoor experience or enhancing your eco-conscious journey, here’s why choosing us is a decision you can feel great about:
Expert and Customized Care
Our knowledgeable and friendly team is here to support you every step of the way. We pride ourselves on providing personalized service and swift responses to ensure a smooth and satisfying experience. Our dedicated team is available via phone, email, and live chat to provide you with prompt and helpful support.
Authorized Retailer of High-Quality, Trusted Products from Leading Brands
We partner with the best brands in the industry to bring you reliable, high-quality products. As authorized retailers, we guarantee authenticity and offer full manufacturer warranties on every item. You can trust that our products are built to last and perform efficiently.
Free & Fast Shipping
We know you’re eager to begin your new products or start your next outdoor adventure. That’s why we prioritize quick, reliable, and free shipping to get your orders to you on time and in perfect condition.
Competitive Pricing
We believe that sustainable living should be accessible to everyone. We offer competitive pricing on all our products, so you can enjoy high-quality eco-friendly solutions and outdoor products without breaking the bank.
Choose Eco Emperor for all your outdoor and eco-friendly product needs, and become part of a movement that’s embracing a more sustainable and adventurous lifestyle.
Thank you for supporting a greener, cleaner future, while enhancing your outdoor experiences and powering your adventures.💚